3 Tips for Following Federal Regulations in Regards to Car Windows

21/04/15

Common sense dictatesthat a driver must have a clear view of the road while operating a motor vehicle. But thiscan be more complicated than it seems-especially when you throw federal regulationsinto the mix. Fortunately, with the right information, you can achieve a clear view in no time at all. Just be sure to follow these three tips.

Tip #1: Repair or Replace Your Faulty Windscreens

Your windscreen isconsidered faulty when there are severe instances of: Chipping Cracking Discolouration Scratching Abrasions Of course, sometimes a minor issue can be repaired. When thisisn't possible, a windscreen replacement becomes necessary. According to NSW regulation, your vehicle will not passsafety inspection with any two of these conditions: A chip that exceeds16 mm diameter A crack along the edge that is 75 mm or longer A hairline crack that exceeds 30 mm in length To avoid a replacement, you'll want to addresschips and cracksimmediately. This way, you can stop the problem before it becomes a bigger issue. 

Tip #2: Choose the Right Glass Type

If you've opted for a windscreen replacement, you'll need to first decide on a glasstype. The two main options are 1. Laminated Glass-a breakage-resistant product that consists of a clear plastic film that issandwiched between two pieces of glass. 2. Tempered Glass-a safer solution that breaksinto tiny square fragments when damaged. If your vehicle was built in 1994 or later, you should have a windscreen built of laminated glass. 

Tip #3: Follow Window-Tinting Standards

If you're looking to escape the hot sun, you may opt for window tinting. Before you make a purchase, remember that the following is not allowed in NSW: Windscreen tinting that exceeds10% of the windscreen's height Spray-on tinting and finishes Mirror-like or reflective tints From there, you have a lot of available optionsfor your automobile window tints. Keep in mind that all driversin Australia are required to have a minimum VLT (visible light transmission) limit of 35%. This meansthat at least 35% of light must pass through the glass. Consult with a professional to keep up with your vehicle type'sspecific regulations. 

More About Window Tinting

It may seem like an easier option to avoid window tinting altogether. However, it'simportant to remember that non-tinted windowscan pose a danger to occupants. With non-tinted windows, your risk of obtaining sagging, leathered or wrinkled skin increases. What's worse isthat skin cancer can also become a threat! On the other hand, having windowsthat are too tinted comes with its own set of risks. It may be easy to assume that a heavily tinted window will simply reduce the heat and UV damage. Unfortunately, thisis not alwaysthe case. When choosing a window tinting company, keep in mind that it'sthe quality (not the degree) of tinting that matters. There are real dangers associated with heavy tinting. Take the following hazards as an example: Voided vehicle insurance. Voided vehicle warranties. Failure to passregistration inspection. Poor night visibility: If an accident iscaused by window tinting that istoo dark, the vehicle owner may be prosecuted. 

Choose the Right Window Treatment for Your Car Today

As you can see, vehicle owners must find the right balance between too much and not enough tint. The easiest way to do thisis by consulting with an experienced tinting company. Work with a team that has local experience. By doing so, you ensure that your tinting project meets state and federal regulations. From there, you can choose a solution that meets your needs and upholds the law. 

tinted car window in dandenong